Newly

A05-Mainboard for OpenPnP (microsmt pnpboard)

Product description

You can also order the same products on ebay
parameters
Material:  PCB  
Color: green
Thickness: 1.6mm 
MCU:   LPC1769FBD100
           120 MHz frequencies , 512 KB Flash, 64 KB SRAM, Ethernet, USB, LQFP100   Package
This mainboard is made according to the open source materials of smoothieboard, and the boot program and firmware have been configured. The firmware comes from  the version   provided by makr.
 you  can  download  the firmware  from
https://makr.zone/smoothieware-new-firmware-for-pnp/500/. 

 



special note
Precautions for adjusting the driving current of stepping motor
1: When you adjust the potentiometer to change the output current, you must remove the stepping motor first, otherwise the TMC2209 will be damaged
 2: When you measure the voltage of the potentiometer, you must connect the 24V power supply. USB power supply is not enough.
 3: Take care that the radiator does not touch the pin.
 
Packing list
PCB  board *1

TMC2209  Drive module *6
Radiator *6
USB   cable *1
Micro SD card*1