Newly

Pixhawk 6C

Product description

The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6C, you can find an STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.
The Pixhawk® 6C's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.
Key Design Points:

High performance H7 Processor with clock speed up to 480 MHz
New cost-effective design with low-profile form factor
Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

 Note: 


M10 GPS Requires PX4 1.14 & ArduPilot 4.3 or newer. 
Power module comparison chart


Specification
Processors & Sensors


FMU Processor: STM32H743


32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM




IO Processor: STM32F103


32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM




On-board sensors


Accel/Gyro: ICM-42688-P


Accel/Gyro: BMI055


Mag: IST8310


Barometer: MS5611




Electrical data


Voltage Ratings:


Max input voltage: 6V


USB Power Input: 4.75~5.25V


Servo Rail Input: 0~36V




Current Ratings:


Telem1 Max output current limiter: 1.5A


All other port combined output current limiter: 1.5A




Mechanical data


Dimensions: 84.8 * 44 * 12.4 mm


Weight (Aluminum Case) : 59.3g


Weight (Plastic Case) : 34.6g


For other technical Information, please visit https://docs.holybro.com/.Latest info on Supported Firmware.
SKU 11054/11055 Includes:

Pixhawk 6C Flight Controller (Plastic or Aluminum)
Cable Set

SKU 20179/20181/20183/20185/20246/20251 Includes:

Pixhawk 6C Flight Controller 
Power Module: PM02 V3 12S/PM06 14S/PM07 14S
Cable Set

SKU 20230/20231/20232/20233/20247/20248/20249/20250/20252/20253/20254/20255 Includes:

Pixhawk 6C Flight Controller 
Power Module: PM02 V3 12S/PM06 14S/PM07 14S
GPS: M9N/M10

Cable Set