Newly

P2 Wi-Fi Module, Cut tape

Product description

*Price is per module and must be ordered in multiples of 10*
Thinking of transitioning from your Argon or Photon-powered prototype into mass production? The P2 is your answer. It's Particle's tiny Wi-Fi module that contains a 200 MHz Realtek MCU, Wi-Fi, and BLE support. The P2 comes pre-loaded with Particle firmware.
The P2 has a built-in antenna and a uFL connector, so you don't have to stress over the optimization of RF designs. This module is FCC, IC, and CE-certified.
The P2 is a SMD module that can only be used when soldered to a base board that contains a regulated 3.3V power supply, and typically buttons, status LED, and a USB connector. The base board is not included and is required for using the P2 module. For prototyping, the Photon 2 developer kit is recommended instead of the P2 module.
Wi-Fi specs:

Dual-band 2.4GHz/5 GHz Wi-Fi IEEE 802.11b/g/n
Ultra low power sleep, stand-by and stop modes
Supports Open, WEP, WAPI, WPA and WPA2-PSK WiFi security modes

Microcontroller Specs:

Realtek RTL8721DM MCU (200 MHz ARM Cortex M33)
2 MB user firmware binary size (maximum)
2 MB flash file system
Shipping in multiples of 10 in cut tape packaging.

P2 module dimensions are: 0.787"(28mm) (W) x 1.102"(20mm) (L) x 0.0787"(2.0mm) (H) +/-0.0039"(0.1mm) (includes metal shielding).
Datasheet