Newly

9000 lb. Hydraulic Winch | H9000

Product description

The Mile Marker H9000 Series hydraulic winch is independent from its solenoid control valve to give more freedom in application and can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. Utilizing the vehicle’s power steering system as its power source allows the H9000 to run continuously without draining the battery.
Completely element proof construction, corrosion and water resistant, the H9000 features two speed spooling, a mechanical lock system, stainless steel tie bars and fasteners, 100’ of Steel Cable, 9,000 pounds of pulling capacity and requires a vehicle specific 34 Series valve adapter kit for installation and operation.
Main Features:

•100% Duty Cycle•2 Speed•Power Steering Pump Powered•Submersible•Stainless Steel Tie Bars and Fasteners• Ductile Iron Body (H12000 Only)•Reversible Mounting (H9000 & H10500 Only)• 3 Mounting Positions (H12000 Only)•Mechanical Lock•Corrosion Resistant•100’ Steel Cable•Roller Fairlead•Free Spooling
Specifications



Gear Train
Planetary


Gear Ratio
6:1


Motor
14 cubic inch


Control Pendant
Not Included, Requires 34 Series Kit


Cable
3/8” X 100’ (nominal 14,400 lbs) (9.53 mm X 30.5 m)


Drum Size
2.5” X 9” (63.5 mm X 228.6 mm)


Net weight
93 lbs (42.2 kgs)


Bolt Pattern
4 Bolt Pattern, 4.5” X 10”, (114.3 mm X 254 mm)


Power Steering Min. Requirements
3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)



 
Performance



3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)








Layer of Cable
1
2
3
4


Line speed-low gear (FPM)
6.16
7.48
8.8
10.5


Rated pull (lbs.)
9,000
7,300
6,200
5,400


Line speed-high gear (FPM)
33.6
38.4
48
57


Rated pull (lbs.)
1,500
1,200
1,000
900



 
Instructions